Arrow Fletching Apparatus2inchTapered

The Fletch App 2T was developed as a user-friendly alternative to conventional fletching with features including:

• Adhesive-free installation
• Use any commonly available 2" or smaller vanes
• Vanes are individually field replaceable
• Only 30 ~ 40 grains each (depending on size)
• 1:60 RH helical twist (2° offset equivalent)
• Over 250 shafts supported and growing. Is your shaft supported? Click here to check.

Installation of the Fletch App 2T is easy.

On a bare shaft, just press it on using the included tool. Even in the field without the tools, a rock, tree, or even your bow riser can be used to press the Fletch App 2T body onto the arrow shaft.

Fletching damage from pass-throughs is a thing of the past with the Fletch App 2T.

Depending on the density of the target or animal the arrow passes through, the Fletch App 2T may fall to the ground and mark the point of impact, or stay on the shaft. If a vane becomes partially dislodged from the Fletch App 2T body, have no fear. Just pull the partially dislodged vane from the slot, remove any dirt or debris from the slot, and slide the vane back into place.

Patented No Glue/No Glue fletching system

No glue required for putting the Fletch App 2T body on the shaft / No glue required for putting vanes into the Fletch App 2T body.

If you've ever fletched your own arrows, you know that the glue can be messy. Also, cyanoacrylate based adhesives ("super glues") have a shelf life on only about 6 months (!), even in ideal conditions, so you have to constantly replace your glue on hand, if you care about things like your vanes not falling off your arrows.

Patent pending Tapered Technology

reduces weight and secures vanes

How it works

The following cutaway images show how the tapered technology sets the Fletch App 2T apart and makes it the best arrow fletching system on the market.

The taper runs from front to back where the overall diameter at point(1) is larger than the overall diameter at point (2). The vane is inserted into the slot opening at the front and pushed rearward. The bottom of the slot (3) is removed toward the rear as the Fletch App 2T tapers. It is this removal of material that reduces the overall weight. As the vane is pushed rearward, the base encounters the arrow shaft and becomes wedged between the top of the slot and the arrow shaft at point (4).

Will they fit on your arrows? Click here to find out.